Fire Protection Company in Etobicoke

Tovic Fire Protection Services is a full-service fire protection company serving Etobicoke and the wider west end of Toronto. From the Humber Bay Shores condo towers to the industrial units around Pearson in Rexdale, we design, install, inspect and monitor the life-safety systems that keep Etobicoke buildings compliant with the Ontario Fire Code. One contractor covers alarms, sprinklers, extinguishers, emergency lighting and 24/7 monitoring.

What fire protection services do you offer in Etobicoke?

We are a single-source contractor, which means one company handles every life-safety system in your Etobicoke building instead of juggling separate vendors for alarms, sprinklers and extinguishers. That keeps your paperwork, scheduling and compliance history in one place. Our work aligns with the Ontario Fire Code (O. Reg. 213/07) under the Fire Protection and Prevention Act, plus the relevant ULC, NFPA and CSA standards.

• Fire alarm inspection and testing to CAN/ULC-S536, plus verification to CAN/ULC-S537 on new installs and modifications.
• Sprinkler and standpipe inspection to NFPA 25, including fire pump testing.
• Portable extinguisher service to NFPA 10, from annual maintenance to hydrostatic testing.
• Emergency and exit lighting with monthly function tests and the annual full-duration test.

Serving west Toronto

Etobicoke sits at the western edge of the City of Toronto, bordered by Mississauga to the west and stretching from the lakeshore up to the airport lands. As a west-end fire protection company, we are close to the whole district and can service a Humber Bay high-rise, an Islington office and a Rexdale warehouse in the same corridor. We also cover neighbouring markets, so a property manager with buildings in both Etobicoke and Mississauga or North York can keep everything under one contractor.

Because our permitted work follows City of Toronto processes, we are used to the local approvals that Etobicoke projects require. That matters when a fire alarm modification or sprinkler change needs to be documented correctly for the fire department and the building file.

Which systems do you install and inspect?

Different Etobicoke buildings need different combinations of equipment, and the inspection frequency varies by system and standard. The table below sets out the systems we work on most often and the typical schedule each one follows.

If you are not sure what is due, our annual fire inspection brings every system onto one schedule and one report. For a broader view of timing, see our guide on how often to inspect fire equipment in Ontario.

What building types across Etobicoke do you cover?

Etobicoke is a mix of dense waterfront condos, established residential streets and heavy industrial zones, and each brings its own fire protection needs.

• Humber Bay high-rise condos: tall residential towers along the lakeshore need coordinated alarm, sprinkler, standpipe and voice evacuation systems. We support condo boards and property managers with testing and monitoring.
• Rexdale industrial near Pearson: warehouses and logistics units in the airport corridor often rely on large sprinkler arrays and pumps. See our warehouse fire protection approach.
• Islington commercial: offices and retail around Islington-City Centre and The Kingsway need alarms, extinguishers and emergency lighting kept inspection-ready.
• Mimico and Long Branch: older low-rise and mixed-use buildings that sometimes need a fire code retrofit to meet current requirements.

How does monitoring and emergency response work?

Installation and inspection keep your systems compliant, but monitoring is what turns a triggered alarm into a dispatched response. Our monitoring is staffed 24/7, so alarm and trouble signals from your Etobicoke building are received around the clock and acted on, day or night. That is especially important for high-rise residential towers in Humber Bay where a fast response protects hundreds of residents.

We also arrange service call-outs for urgent issues, such as a sprinkler leak, a fire pump fault or a panel in trouble. Keeping the same contractor for both inspection and monitoring means the team responding already knows your building.

Why a local Etobicoke contractor matters

Etobicoke's building stock is unusually varied for a single district, and that variety shapes how fire protection has to be handled. The Humber Bay Shores waterfront has seen a wave of newer high-rise towers, where the fire alarm, sprinkler, standpipe and voice communication systems are tied together and tested as a coordinated package. Move a few kilometres north to Rexdale and the airport lands, and the priorities shift to large-area sprinkler coverage, fire pumps and hydrants sized for warehouse and logistics use. In between, the older commercial strips around Islington, Six Points and The Kingsway include mid-century buildings where systems have been added and modified over decades. Knowing that context up front means fewer surprises during an inspection.

Under the Ontario Fire Code, the building owner is responsible for keeping every required fire protection system inspected, tested and maintained on schedule, and for keeping the records that prove it. When Toronto Fire Services or an insurer asks for documentation, having one Etobicoke contractor who holds the full inspection history for your property makes that request far easier to answer. It also helps when a system needs work: because we already know how your alarm, sprinkler and lighting systems are configured, we can scope a repair or a code retrofit without starting from a blank sheet each time.

How do I book an Etobicoke assessment?

Booking is simple. Call 647-377-3517 or use our contact form to request a site assessment. We review your building, confirm which systems are due, and give you a clear plan aligned to the Ontario Fire Code. Whether you manage a single Islington storefront or a portfolio of Humber Bay towers, you get one point of contact for everything. Explore the full range on our services page.

Frequently asked questions